IPM Affordable II Stretch Wrapper
The "Affordable II" Stretch Wrapper provides low volume shippers with a high quality, high performance, low investment answer to stretch wrapping costs. Stretch wrapping with film or netting unitizes your pallet load to reduce pilferage, loss and breakage.
The Platform Turntable model, for use with fork-lifts is equipped with a 48 inch (1219 mm) square turntable with rounded corners. This has a load capacity of 3,000lbs (1364 kg) and is powered at a 1/2 HP, 115 volt A.C motor.
The Low Profile model, for use with fork-lifts or pallet jacks is equipped with a 60 inch (1524 mm) diameter round turntable which has a load capacity of 4,000 lbs (1818 kg) and is powered at 6 RPM by a 1/2 HP, 115 volt A.C motor. Turntable is approximately 1/4'' higher than the ramp which permits wrapping of loads that hang over the turntable.
The Spiral Mast, is a variable speed film carriage elevator to adjust overlap of film or netting. It handles rolls of film or netting up to 20 inches (508 mm) wide and 12 inches (305 mm) diameter standard. It will wrap loads of 85 inches (2159 mm) high with 20 inch (508 mm) wide film or netting. The Pendant control is convenient to use with variable speed elavator control, on-off switch for turntable and up-off-down rocker switch for film carriage elavator control.
Wide Web Mast, handles rolls of film or netting 12 inches (305 mm) diameter by up to 60 inches (1524 mm) wide standard or 80 inches (2032 mm) wide optional. A foot switch controls the starting and stopping of the turntable.
||550 lbs. (250 kg)
||900 lbs. (409 kg)
||425 lbs. (193 kg)
||775 lbs. (352 kg)|